← Back to Setup Guides
📡

Router Setup

Cudy Router WireGuard Setup

Step-by-step guide to set up WireGuard VPN on your Cudy router using the built-in VPN client — no firmware flashing required.

WireGuardRouterCudyNative Support

WireGuard Connection Details

Server
auto.velavpn.com
Port
51820
Protocol
WireGuard
💡 Cudy routers (WR3000, WR2100, X6, AC1200 and similar) include a native WireGuard VPN client in their stock firmware — no third-party firmware needed.
Step-by-Step Setup

  1. Make sure your Cudy router firmware is up to date. Go to System → Firmware and check for updates.

  2. Log in to velavpn.com/account, find your server in the server list, and click Download Config to save the .conf file to your device.

  3. Log in to the Cudy admin panel at http://192.168.10.1 using your admin credentials.

  4. Navigate to VPN → WireGuard → WireGuard Client.

  5. Click Add, then select Import Config. Upload the .conf file downloaded from velavpn.com/account.

  6. Verify the endpoint shows auto.velavpn.com:51820 and the keys are populated correctly. Click Save.

  7. Toggle the Enable switch on the tunnel you just created to activate it.

  8. Go to VPN → WireGuard → Global Settings. Set Policy Routing to Route all traffic through VPN to protect all LAN devices.

  9. All devices connected to your Cudy router are now protected by Vela VPN.

🖼️

Cudy admin panel — VPN → WireGuard Client page

💡 After enabling the VPN, connect a phone to your Cudy router's Wi-Fi and visit ipinfo.io to confirm your IP has changed to a Vela server location.
Get the App